Operation Manual

13
3. Macro
The Macro function allows you to send buttons continuously by pressing a
Marco key. In other words, you can set a Macro key to substitute a
complicated procedure as described below:
 A Normal Macro key can store up to 60
commands, however a Smart Macro key can
only store up to 16 commands and total 10
sets will be allowed. Both Normal and Smart
Macro key can be assigned in any button
(except the device button) as a desired Macro
key.
Note: Max. number of learning macro will be 10.
Over the limitation will stop user to enter Setup
page.
 In a Smart/ Normal Macro key, you can set a
delay time between two buttons.
 The transmitted buttons will appear sequentially on the LCD screen when
a macro key is started up.
WHAT is the Normal Macro
After all codes setting have been finished, you can enter desired buttons one by
one into a Macro key according to personal preference.
WHAT is the Smart Macro
Gather all necessary remote controls, and press desired
buttons one by one sequentially to transmit IR codes into
the assigned macro key by the Learning function. You
are unnecessary to finish setting all codes before running
Macro process.
Now, let’s learn how to set up a Macro key.