Operation Manual

14
3.1 Normal Macro
At first, you need to confirm the input of remote codes which are
successful before setting the Normal Macro.
(1) Press “SETUP” and “MACRO” to enter the setup mode, and then
press “MACRO KEY” to start the setup.
(2) Now, you can see the blinking “MACRO”
icon at the top of the screen, and select
a key for the Macro key (we recommend
you to select a less frequently used
key). After that, start to pressing
desired buttons one by one to be saved
into the Normal Macro key. Each
Normal Macro key can store up to 60
buttons.
“MACRO” icon Assign a key
is blinking to be the
Macro key
(3) After pressing the first button, you are
able to choose whether or not to input a
delay time (process as shown below).
a. Press “DELAY KEY” at the top of the
screen to enter the delay page.
b. The time selection page includes the
numbers 0-9.
Press “1” = 1 second
Press “2” = 2 seconds
Press “1”+”2” = 12 seconds
Press “6”+”0” = 60 seconds