Operation Manual

15
* Press “CLEAR” to clear a selected number
* Press “ENTER” to confirm the set delay time.
* Press “EXIT” to cancel the delay time setup and return to the
Macro setup page.
c. If it is not necessary to set a delay time, the default setting is 0.4
second between 2 buttons.
(4) Continue to input desired buttons until you press “EXIT” to exit. At
the moment, the “OK” key will appear. Make sure you press “OK” to
save your setup. When you return to the main page, press “MACRO”
to check the currently set MACRO key positions.