Operation Manual

16
(5) Let us take a look at an example of setting a MACRO.
For instance, the procedure for viewing DVD at home is given as
follows:
a. Power on the TV.
b. Switch TV screen to the video mode.
c. Power on the DVD.
e. Start playing the DVD disk.
Operation Procedure Required Setting Process on SRC-3200
Power on the TV
1. Enter the setup page, and press “MACRO
KEY” to start the setup.
2. Select the “TV” device page and press
as the Normal Macro key (You also can assign
this key freely).
3. Press the “Power” button in the TV device
page
Set 2 second delay time
4. Press “DELAY”.
5. Press the numeric key “2” to select a delay of
2 seconds.
6. Press “ENTER” to confirm the delay time.
Switch TV screen to the
video mode
7. Press “TV/Video”
Power on the DVD drive
8. Select the DVD device page.
9. Press the “Power” button in the DVD device
page.
Set 2 second delay time
10. Press “DELAY”.
11. Press the numeric key “2” to select a delay of
2 seconds.
12. Press “ENTER” to confirm the delay time.
Play the DVD disk
13. Press the “Play” button in the DVD device
page.
14. Press “EXIT” to go to the save page.
15. Press “OK” to save the setting.