Operation Manual

17
3.2 Smart Macro
Before starting the Smart Macro, you should gather all required original
remote controls.
(1) After you enter the Macro setup page, press “LEARN” to start the setup.
(2) Before operation, please note that you
are required to keep 2-4 inches distance
away between SRC-3200 and the original
remote and put them in a line. During
learning, please hold pressing every
learnt key of the original remote until the
message has popped up on the
screen of SRC-3200 and hear a beep
(refer to P.11 for more detailed learning
instruction).
(3) Select a key as the Smart Macro key (we
recommend you to select a less
frequently used key). At the moment
the “LEARN” message will appear at the
upper left corner. The selected Smart
Macro key will keep blinking, and now
you can press the desired buttons to be
saved into the “Smart Macro” key. Each
Smart Macro key can save up to 16 keys.
Assign a Key
(ex. SLEEP key)