Operation Manual

(4) At first, please take required original

remotes and aim it sequentially at the

Learning eye of SRC-3200 (refer to P9

Learning function) and press desired

buttons to transmit its IR code to the

SRC-3200 in order to save in the Smart

Macro key. (See the illustrations for clear

concept at right side )

Send the learnt key to the

blinking Macro key

(ex. TV “POWER” key)

(5) During setting the Smart Macro key,

between two pressed buttons, you are

able to choose whether or not to input a

delay time (process as shown below).

a. Press “DELAY KEY” at the top of the

screen to enter the delay page.

b. The time selection page includes the

numbers 0-9.

Press “1” = 1 second

Press “2” = 2 seconds

Press “1”+”2” = 12 seconds

Press “6”+”0” = 60 seconds

* Press “CLEAR” to clear a selected

number

* Press “ENTER” to confirm the set

delay time.

* Press “EXIT” to cancel the delay

time setup and return to the Macro

setup page.

c. If it is not necessary to set a longer delay time, the default setting is

0.4 second between two buttons.

(6) Continue to input desired buttons until you press “EXIT” to exit. At the

moment, the “OK” key will appear. Make sure you press “OK” to save

your setup. When you return to the main page, press “MACRO” to

check the currently set MACRO key positions.