Operation Manual

19
(7) Let us take a look at an example of setting a MACRO.
For instance, the procedure for viewing DVD at home is given as follows.
a. Power on the TV.
b. Switch TV screen to the video mode.
c. Power on the DVD.
e. Start playing the DVD disk.
Operation Procedure Required Setting Process on SRC-3200
Power on the TV.
1. Enter the Marco setup page, and press
“LEARN” for the Smart Macro setup.
2. Press the “TV” device key and select as
the Smart Macro key. (You also can assign this
key freely).
3. Get the TV remote control ready and aim it at
the learning eye of the SRC-3200
4. Press the “POWER” button of the TV remote
control.
Set 2 second delay time.
5. Press “DELAY”
6. Press the numeric key “2” to select a delay of
2 seconds.
7. Press “ENTER” to confirm the delay time.
Switch TV screen to the
Video mode.
8. Press the “TV/VIDEO” button of the TV
remote control.
Power on the DVD drive.
9. Get the DVD remote control and aim it at the
learning eye of the SRC-3200
10.Press the “POWER” button of the DVD remote
control.
Set 2 second delay time
11.Press “DELAY”
12.Press the numeric key “2” to add and select a
delay of 2 seconds.
13.Press “ENTER” to confirm the delay time.
Play the DVD disk.
14.Press the “PLAY” button of the DVD remote
control.
15.Press “EXIT” to go to the save page.
16.Press “OK” to save the macro key.