Operation Manual

4. Delete a Key Code

(1) Press “DELETE” after entering the setup

mode. A

desired device page will appear.

You can delete any desired key code in the

device, or switch to different device page

for further deletion.

(2) For the key code deletion, select the desired

key and press it until you hear a beep and

see “OK” message on the screen so as to

complete the operation. Continue to

delete another key code until you press

“EXIT” to exit this operating mode.

Notes:

This function only can delete the code memory of a particular key, but

not the key identity.

5. Delete a Whole Device Codes

(1) Press “DEL. BANK” after entering the setup

mode. A screen for deleting all codes of a

device will appear. You can switch to any

device if needed.

(2) Select a desired device and press “OK” for

the deletion. If successful, you will hear a

beep and see “OK” message on the screen,

so as to complete the operation. If

needed, you can continue deleting another

device until you press “EXIT” to exit.

Notes:

This function only can delete the code memory of a particular device,

but not a device identity.