Operation Manual

7. Transmission

The “TRANS” function will copy all data to another SRC-3200. Before using

the function, you need to purchase a SLC-2080 USB cable (optional) for

connection. Please comply with the following instructions to complete the

operation.

(1) Connect the transmitting end to the receiving end by the transmission

line properly.

(2) At the transmitting end, press “SETUP” to enter the setup mode. And

then press “TRANS.” to start the transmitting operation.

(3) The screen of transmitting data as well as the screen of completing the

data transmission will appear.

(4) You will hear a beep and see “OK” message at the top of the screen after

the transmission completed. The screen will automatically return to the

main page.

Notes:

If you fail to transmit the data, you will hear three beeps and see

“ERROR” message on the screen.