Operation Manual

24
8. Function Lock
The function will lock part of important setup keys. If it is enabled, you will
not allow entering the CODE/LEARN/MACRO/DEL functions anymore, but
the original settings are unlimited even after you press “RESET”.
(1) Enter the setup mode and select a
desired device (such as TV).
(2) Press and hold the PAGE key for 4
seconds. When you hear a beep,
it represents you have completed
the setup.
(3) Press “EXIT” to exit the setup
page.
Notes:
If you want to release the setup lock, please repeat the foregoing
procedure.
9. Reset
Press and hold “RESET” for 4 seconds after you have
entered the setup page, and the system will restore the
factory default settings automatically.