Operation Manual

3
 Battery
Installing Battery
Press the button at the back of the SRC-3200 remote
control, and the battery compartment will pop out
automatically. Install four AAA batteries into the
battery compartment correctly. And then put the
battery compartment back.
Cautions:
1. Make sure the anode (+) and cathode (-) of the battery match the
polarity indicated in the battery compartment.
2. DO NOT mix different types of batteries or old and new batteries. Always
use fresh batteries. Alkaline batteries are recommended.
3. DO NOT expose the remote control in a very hot environment or in a
flame.
4. Keep the battery out of reach of children.
5. To reduce danger of leakage and damage, remove batteries that have
been used for more than two years.
 Touch Screen
How to Protect Touch Screen
 DO NOT press the LCD screen forcefully. Gently touch the screen to operate
the remote control.
 DO NOT use a pen or any sharp object to press the screen.
 DO NOT submerge the SRC-3200 in any liquid since it does not come with a
waterproof function. Immediately wipe off any liquid spilled on the SRC-3200
and keep the SRC-3200 dry all the time.
 DO NOT put the SRC-3200 in a hot environment, and keep it away from heat
sources.
 DO NOT drop the SRC-3200.
 DO NOT place any object on the screen.
 DO NOT clean the screen by corrosive detergent. Clean the screen by soft
moist cloth.