Operation Manual

6
Setting Up Your SRC-3200
The SRC-3200 features simple and easy setup, so that you can set up your
SRC-3200 as a smart control center for the home devices by following the
instructions given below:
Before operation, please note that
1. A low battery power will reduce the effective transmitting range of the
remote control.
2. If your battery is exhausted, a low battery power icon as shown below will
appear at the upper right corner of the screen.
(Low Battery Power Icon)
3. The SRC-3200 will not lose programmed data when batteries are replaced.
Warning:
When the low-battery warning
icon appears, you cannot
enter the Setup Page. Change
the battery first before
continuing your setup.