Operation Manual

 Main Setup Page

Please press “SETUP” at the top of the screen for 2 seconds to enter the setup

mode. You will see related setup functions: CODE, LEARN, MACRO, DELETE,

DEL. BANK, RESET, BUZZER, BACKLIGHT and TRANS.

CODE

Set the pre-programmed code

LEARN

Learn IR codes

MACRO

Set normal macro or smart

macro

DELETE

Delete a single key code

DEL. BANK

Delete all code data of a device

RESET

Return to the factory default

BUZZER

Set a buzzer

BLACKLIGHT

Set a backlight

TRANS

Duplicate all data to another

SRC-3200

EXIT

Exit the setup mode

 Operating Each Function

1. Code

The SRC-3200 provides two ways of setting the

pre-programmed code of your device. You can

either search the code by SRC-3200

automatically, or check the brand of your

device from the code list and then enter the

required code member into SRC-3200

manually. Take out the code list from the box

if you need to check the brand of your device.

Now, enter the setup mode and press “CODE”

in order to set the pre-programmed code for

your device.