Z2 WIRELESS CONTROLLER Components Home Motion Assist Turbo Keymap M1 M2 LT M2 M1 M4 M3 R RT RT Shift L M3 M4 LT Shift
SWITCH Bluetooth Connection Pair + B 1. Turn on Switch, select “Controller”, “Change Grip/Order”. 2. Hold Home and B button till the light turns red. Wait. 3. Once succeed, the light stays red. Link / Wakeup Press Home button to link. In case Switch in sleep, it will be waked up automatically. Wired Connection Just connect to Switch or its dock via USB-C cable. ANDROID Bluetooth Connection Pair LINUX + A 1. Enable Bluetooth, select to pair new device. 2.
WINDOWS Bluetooth Connection APPLE DEVICES Pair (option 1) + X 1. Turn on Blueooth, select to add a device. 2. Hold Home and X button till the light turns blue. 3. Pair the device “Xbox Wireless Controller”. 4. Once succeed, the light stays blue. Pair (option 2) + B 1. Turn on Bluetooth, select to add a device. 2. Hold Home and B button till the light turns red. 3. Pair the device “Pro Controller”. 4. Once succeed, the light stays red. By this mode, motion control is enabled in Steam.
GENERAL Pair & Link 1. Pair only at the first time sync with the device. Thereafter, just link. 2. Only the latest device info be saved. If ever paired with another device thereafter, pair again. 3. Pairing lasts 30 seconds, then shut off if not succeed. 4. Linking lasts 10 seconds, then shut off if not succeed. Sleep & Reset 1. Auto sleep in 5 munutes of idle time. 2. Auto sleep when disconnected. 3. Press Home button for 5 seconds to reset and force sleep. Battery & Charge 1.
ADVANCED Turbo Setting 1. Press Turbo button, together with the chosen button to enable Turbo. Please repeat the same operation to set for more buttons. Once done, LED turns on. Press the button to activate (keep being hit at the set speed), and release to stop. 2. Press Turbo button, together with the chosen button turbo enabled at step 1, to enable Auto Turbo. Please repeat the same operation to set for more buttons. Once done, LED blinks, the button keeps being hit at the set speed automatically.
ADVANCED Keymap General Operation Press to activate. If mapping exists in any of M1-4 buttons, both lights stay blue, the button behaves the same as the mapped one. Press again to disable. Mapping M 1. Press Keymap button for 2 seconds, till the left light blinks red. 2. Press any of M1-4 buttons chosen to assign mapping. Once succeed, the left light stays blue, the right light starts blinking red. 3. Press any button chosen to be mapped. Once succeed, the right light stays blue.
ADVANCED Motion Assist When motion assist function is on, gyro sensor works as the right thumbstick, so to take advantage of motion control in games not natively support. The right thumbstick works as normal at the same time. Global Motion Assist Press to activate. Press again to disable. Responsive Motion Assist Hold Motion Assist button for 2 seconds, light blinks, then press the button chosen to activate. Once succeed, the light blinks slowly.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
