Owner's Manual

Page 4 of 6
ON DIP
ON DIP
Reset Button:
The reset button can be used to reset the transmitter if transmitter is not working properly. The reset button is
located closed to the battery door cover. press the reset button and the transmitter will reset and initialize for
few seconds before it can be used.
OPERATIONS:
Transmitter:
General:
The RCB07 Remote Control has two (2) operating modes: Manual and Thermostatic. The
control system can be set to temperature ranges between 45°F and 90°F.
The transmitter will operate the remote receiver from 1 foot to a maximum of 30 feet. The
distance is reduced when batteries are low or when the receiver is inside a metal enclosure.
WARNI
NG
Do not use two (2) or more remote control systems in the same area with the same dip switch
settings, as they will communicate with each other. This may cause the appliances to
malfunction.
Receiver
Dip Switch (Default)
Transmitter