Introduction The device measures Gauge/Differential Pressure from -55 H40 psi. It features 11 delectable units of measure:in Ho Q, psi, bar, mar, Kpa, In Hg, mm Hg, coziness, FiH, 0, crab 0, gem, Additional features include Data Hold and Auto Power Off disabled. Careful use of this meter will provide years of reliable service.
Specifications Function | Range Resolution Function | Range Resolution inhibit [455.40 0.01 akin? 32.00 0.01 psi +2.000 0.001 Fifth 4.612 0.001 Mar | £137.8 eamH20 | 140.6 0.1 kPa |z1379 Gem? | 0140 0.001 in Hg 0.407 0.001 Bar 0.137 0.001 mm Hg: | £103.4 Display Dual LCD Accuracy Repeatability Linearity/ Hysteresis 10.29% FSO Maximum Pressure psi Response Time nanoseconds typical Low Battery Indicator Yes Ever Range Indicator Err. Under Range Indicator Err.
Button The meter has six buttons. 1. UNITS 2. DIF 3. HOD 4. ON/OFF A. REC B. BACK LIGHT ‘Display Description 1. Hold Function 3 2. Differential Made ee 3. Primary Data Screen | 4. Record Mode | 5, MAX/MIN/AVG ‘ : 6. Low Battery Indicator 7. Pressure Unit Indicator 8. .
Operation 1. Power Press the ON/OFF button to turn power on or off. The meter will perform a short self fest when furred on. The meter defaults to the setting used during the last operation. 2. Zero Adjust and Offset } Before use and without filings attached fo the meter, press the HOLD button for more than 2 seconds to zero the meter. The meter will reset and display “000” from right to left, 0.000 will be display.
3. Press the REC button to display the minimum MIN reading with the relative time. 4. Press the REC button to display the average value AVG reading with the relative time. 5. Press the REC bunion again to continue recording MIN/MAX/AVG measurements. 6. To exit the MIN/MAX/AYG mode, press the REC button for 3 seconds to return fo normal operation. 7. Back light Display Press the Back light button fe turn on the back light. It will remain on for 40 seconds. 8.
Ripe SEALED UNIT PARTS C0., INC.