User Guide

SAFETY
WEAR EYE PROTECTION
WEAR GLOVES
FOLLOW ALL COMPANY
SAFETY MANUALS
Product Questions? Need Technical Assistance?
We’re here to help.
1.800.333.9125 ext. 261
[e-mail]
INSTRUCTIONS
Place hub adaptor over hub and
tighten set screws
Place hub puller over hub adaptor
and turn clockwise to lock
Attach drill/impact driver to shaft
Engage drill/impact driver
clockwise to pull hub
Remove shaft set screw
Remove all motor mounting bolts
Determine hub size and select
proper plastic centering bushing
Place centering bushing inside of
locking hub adaptor
You can also try to search for the product
and check the FAQ tab to view answers to
commonly asked questions.
Helpful Notes
Soak motor shaft with penetrating oil before pulling hub.
Apply oil to puller shaft as needed.
1.
2.
3.
4.
5.
6.
7.
8.