Submittal Sheet

SL500TC Temperature Range
The accuracy stated is for the SL500TC only. Inaccurate readings increase based on the thermocouple
wire grade being used. The logger supported range is for stored temperature.
SL500TC Specifications
Sample Point Capacity: 32,638 temperature points.
Includes: Type K insulated beaded wire thermocouple 40” (1m).
Other Supported Thermocouples: J, E, N, T, S, R, B, C
Display: Current reading and time, logging status, alarm status,
recorded sample history, battery level, thermocouple type.
Displays temperature up to 1999°F or 1999°C.
Alarms: Visual over and under temperature alarms.
Display Temperature Resolution: 0.2°F (0.1°C) up to 199.9°F or °C. 1°F or 1°C above 200°F or 200°C
Logged Temperature Resolution: 0.2°F (0.1°C)
Thermocouple Impedance: 50 Ohms maximum for specified accuracy
Cold Junction Temperature Accuracy: +/- 0.5°F (0.3°C)
Calibration: User single point offset calibration is available through software.
Calibration is password protected.
Operating Temperature: 0°F to 131°F (-18°C to 55°C)
Storage Temperature: -20°F to 175°F (-30°C to 80°C)
Time Accuracy: +/- 100 ppm @ 75°F (24°C)
Dimensions: 2.15” x 2.25” x 1.2” (5.5cm x 5.7cm x 3.0cm)
Power Source: 3-AAA batteries (Alkaline or Lithium recommended), included.
Battery Life: 2-years average use
THERMOCOUPLE ACCURACY SL500TC TEMPERATURE RANGE
K +/- 1.3°F (0.7°C) -418 to 2372°F (-250 to 1300°C)
J +/- 1.0°F (0.6°C) -274 to 1832°F (-170 to 1000°C)
E +/- 0.8°F (0.4°C) -328 to 1508°F (-200 to 820°C)
N +/- 1.5°F (0.8°C) -328 to 2372°F (-200 to 1300°C)
T +/- 1.3°F (0.7°C) -328 to 752°F (-200 to 400°C)
S +/- 5.0°F (2.8°C) -58 to 3200°F (-50 to 1760°C)
R +/- 5.0°F (2.8°C) -58 to 3200°F (-50 to 1760°C)
B +/- 6.0°F (3.3°C) 68 to 3308°F (20 to 1820°C)
C +/- 3.0°F (1.7°C) 32 to 4208°F (0 to 2320°C)