TM Coil Cleaning Made Easy Model: #ZPB140
Troubleshooting TM Problem Check Power Supply. Temperature is Too Low. Make sure you have 120V Power. Check Power Switch Increase Temperature. Low Pressure. Inlet Filter Screen or Hose is Plugged. Pump is Air Bound. Clean Inlet Filter / Screen Disconnect Trigger Sprayer, Run Pump for Few Seconds to Remove Air. Fix Hoses. Clean Pump. Warnings ....................................................................... Page 2 Product Description & Application ................................................
Description & Application Pump The Port-A-Blaster pressure washer is designed to clean air conditioning and refrigeration coils. It is designed with a low pressure setting for indoor evaporator coils and a high pressure setting for outdoor condenser coils. It is lightweight, ruggedly built, reliable, self-priming and easy to use and carry. All accessories (trigger sprayer, wand/nozzle, and hoses) are Trigger Sprayer with Wand & Adjustable Nozzle the pressure control.
Operating Instructions (continued) 7. Turn Power on and choose “INDOOR” (low pressure) or “OUTDOOR” (high Pressure). Squeeze trigger to activate pump. Pump will discharge air as it primes. Warnings Warning Always disconnect power before making any adjustments or service to the machine. Do not operate in the vicinity of Warning Do Not Run Port-A-BlasterTM without water or cleaning solution. Doing so will damage the pump. 8.
