MSDS

9420 Santa Anita Avenue
Rancho Cucamonga, CA 91730
[phone] ٠ Corp. Office: [phone]
Fax: [phone] www.pacertechnology.com
Page 1 of 3
FOR CHEMICAL EMERGENCY ONLY:
1. PRODUCT
IDENTIFICATION:
2. COMPOSITION/INGREDIENTS:
3. HAZARDS IDENTIFICATION:
Emergency Overview
HMIS NFPA
Health
Flammability
Reactivity
Physical Hazard
1
3
0
1
3
0
Clear liquid with a ketone type odor. FLAMMABLE. HARMFUL IF SWALLOWED.
VAPOR HARMFUL. INJURIOUS TO EYES. May cause temporary dizziness,
headache, and possible nausea if used in poorly ventilated area. Solvents
may defat skin if contact occurs. Avoid contact with eyes, mucous
membranes and prolonged skin contact.
KEEP OUT OF REACH OF CHILDREN.
Toxicity Prolonged or repeated skin contact may cause dermatitis in sensitive individuals.
Primary routes of
entry
Inhalation Skin Eyes Ingestion
X X
Inhalation Temporary dizziness, headache, possible nausea with poor ventilation.
Skin Slight irritation.
Eyes Irritation.
Signs/Symptoms
of Exposure
Ingestion May be harmful if swallowed.
4. FIRST AID MEASURES:
Inhalation
Remove to fresh air. Perform artificial respiration if breathing is difficult and get medical attention.
Skin
Remove contaminated clothing and was affected areas with soap & water. Prolonged or repeated
contact may cause dermatitis.
Eyes
Immediately flush eye with large amounts of water for 15 minutes. Contact a physician immediately.
Ingestion
Do not induce vomiting. Get immediate medical attention.
5. FIRE FIGHTING MEASURES: FLASH POINT: 21
0
F/-6
0
C LEL: 1.7% UEL: 10%
Extinguishing
Media
Dry chemical, foam or carbon dioxide.
Special Fire
Fighting
Procedures
Firefighters should wear self-contained breathing apparatus. Water can be used to cool fire-
exposed containers.
Hazardous
Products of
Combustion
Carbon monoxide, carbon dioxide, and unknown fumes.
Unusual
Fire/Explosion
Hazards
Keep away from heat, sparks, and open flames. Vapors can cause a flash fire. Vapors may also
ignite explosively.
Product ID Model/Hobby Cement - 15263
CHEMICAL NAME CAS # OSHA PEL ACGIH TLV Other Limits Wt. %
Methyl Ethyl Ketone
Polystyrene Resin
78-93-3
9003-53-6
200 ppm
NE
200 ppm
NE
60-80
20-40
US & CANADA
: (800) 424
-
9300
Int’l & Wash. DC
: (703) 527
-
388
7
MATERIAL SAFETY
DATA SHEET