SDS

SAFETY DATA SHEET
Date Prepared : 11/14/2014
MSDS No :
Date-Revised : 11/14/2014
Revision No : 1
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
OSHA PEL ACGIH TLV
Chemical Name ppm mg/m
3
ppm mg/m
3
2-ethylhexanoic acid
TWA
[1] [1]
5
STEL
[1] [1]
OSHA TABLE COMMENTS:
1. Not Established
ENGINEERING CONTROLS: Use only in a well ventilated area.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: For normal conditions, wear safety glasses. Where there is reasonable probability of liquid contact, wear
splash-proof goggles.
SKIN: Wear rubber gloves to avoid prolonged skin contact.
RESPIRATORY: Use only in a well ventilated area.
PROTECTIVE CLOTHING: Wear protective clothing. Launder contaminated clothing before reuse.
WORK HYGIENIC PRACTICES: Avoid contact with skin and eyes. Wash thoroughly after handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOR: Sulfur odor.
ODOR THRESHOLD: No data available on this product.
APPEARANCE: Pale yellow viscous liquid.
pH: Not Established
PERCENT VOLATILE: Not Established
FLASHPOINT AND METHOD: 110°C (230°F) DIN 51758
FLAMMABLE LIMITS: Not Established
AUTOIGNITION TEMPERATURE: Not Established
VAPOR PRESSURE: Not Established
VAPOR DENSITY: 1.1 g/cc @ 25C / 77F
BOILING POINT: > 200°C (392°F)
FREEZING POINT: Not Established
MELTING POINT: Not Established
POUR POINT: Not Established
THERMAL DECOMPOSITION: Not Established
SOLUBILITY IN WATER: Slight
EVAPORATION RATE: Not Established
Page 4 of 7
Delayed Epoxy-GHS - HARDENER