MSDS

Page 2 of 6
3. COMPOSITION/INFORMATION ON INGREDIENTS
Components % ACGIH TLV OSHA PEL OTHER
Polyalphaolefin <85 5mg/m³ TWA (mist:) 5mg/m³ TWA (mist:) None
68037-01-4 10mg/m³ STEL (mist:)
White mineral oil (petroleum) <25 5mg/m³ TWA (mist:) 5mg/m³ TWA (mist:) None
8042-47-5 10mg/m³ STEL (mist:)
Fumed Silica <5 10mg/m³ TWA 6mg/m³ TWA None
68611-44-9
Polytetrafluoroethylene <4 Not established Not established None
9002-84-0
Antioxidant <2 Not established Not established None
41484-35-9
Polyglycol <1 AIHA WEEL
025322-69-4 is 50 ppm Total
10mg/m³ aerosol only
Polyisobutylene <0.5 Not established Not established None
9003-27-4
4. FIRST AID MEASURES
Inhalation: Remove to fresh air. If discomfort persists seek medical
attention.
Skin contact: After contact with skin, wash immediately with plenty of
water. Immediately flush skin with plenty of water
(using soap, if available). Get medical attention if
symptoms develop and persist.
Eye contact: Rinse immediately with plenty of water, also under the
eyelids, for at least 15 minutes. Get medical attention.
Ingestion: Do not induce vomiting. Get medical attention.
5. FIRE-FIGHTING MEASURES
Flash point: >428° F (220° C) COC
Auto ignition temperature: Not available
Flammable/Explosive limits-lower %: N/A