User manual

Chapter 2: Server Installation
2-9
Figure 2-4.
Accessing the Inside of the System
2-6 Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the SATA drives
and their backplane have been properly installed and all essential connections
have been made.
Checking the Drives
1. The SATA disk drives can be installed and removed from the front of the
chassis without removing the top chassis cover.
2. Depending upon your system's confi guration, your system may have one or
more drives already installed. If you need to install drives, please refer to the
appropriate section in Chapter 6.
Release buttons