User's Manual

C-12
X6DAT-G/X6DAi-G User's Manual
The action buttons are:
* Logout—Selecting Logout ends your session and returns you to the Login
screen.
* Rescan—Used to rescan the configuration of the system. Typically, when
a rescan is required, it occurs automatically; for example, after an array is
created.
However, the system configuration can change without Adaptec Storage
Manager being notified. For example, drives that are inserted or removed
from a nonintelligent enclosure, or an enclosure powered on after you
logged into Adaptec Storage Manager would not be displayed unless you
manually rescan.
The remaining buttons open additional windows that provide more detailed
information, and allow you to perform actions or change settings on a
specific aspect of your storage subsystem. These are:
* Events
* Options
* Help
* Properties
* Tasks
Immediately following the header frame is a controller information line
including the model number of the first Adaptec RAID controller found in the
system, and the amount of cache memory (if any) installed on that controller.
Beneath the controller information are Physical Devices and Logical Devices
views that show connected devices and existing arrays on this controller.
Controller information and device views are repeated for each additional
Adaptec RAID controller in the system.
Select the controller by clicking anywhere on the controller information.
When the controller is selected, the Events, Properties and Tasks buttons
change from blue to amber, indicating that clicking any of them will display
an additional window with information and options specific to this controller.
Pop-Up Tool Tips
If you position the cursor over a device or button a pop-up tool tip appears.
For buttons, the tips contain helpful information about the function of the
button, while for devices they display additional information.