User's Manual

5-22
SUPERSERVER 5016I-T/5016I-TF User's Manual
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located on the I/O
backplane) have two LEDs. On each
port, one LED indicates activity while
the other LED may be green, amber
or off to indicate the speed of the con-
nection. See the tables on the right for
more information.
LAN1/2 LED
Link LED
LED Color Defi nition
Off No Connection or 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
LAN1/LAN2
Activity LED
Color Status Defi nition
Yellow Blinking Active
IPMI Dedicated LAN LEDs
In addition to LAN1/LAN2, a dedicated
IPMI LAN port is also provided on the
X8SIL/X8SIL-F. The yellow LED indi-
cates activity, while the green LED
indicates the speed of the connec-
tion. See the table at right for more
information.
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED Status Defi nition
Link Green: Solid 100 Mb/s
Activity Yellow: Blink-
ing
Active
Onboard PWR LED
LED Color Defi nition
Off System Off
On System on, or
System off and PWR
Cable Connected
Onboard Power LED
An Onboard Power LED is located at
LE4 on the motherboard. When LE4 is
on, the AC power cable is connected.
Make sure to disconnect the power
cable before removing or installing any
component. See the table on the right
for more details.
IPMI Heartbeat LED
An IPMI Heartbeat LED is located at
LE7. When LE7 blinks, IPMI is func-
tioning properly. Refer to the table on
the right for details.
IPMI Heartbeat LED
Green: Blinking IPMI is ready for use