User's Manual

C-10

UPERSERVER 5015M-UR/5015M-U/5015M-NTR/5015M-NT User's Manual

C-2 Installing Windows XP/2000/2003 for RAID Systems

New Operating System-Windows XP/2000/2003 Installation

a. Insert Microsoft Windows XP/2000/2003 Setup CD in the CD Driver, and the

system will start booting up from CD.

b. Press the <F6> key when the message-" Press F6 if you need to install a third

party SCSI or RAID driver" displays.

c. When the Windows XP/2000/2003 Setup screen appears, press "S" to specify

additional device(s).

d. Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH7R into Drive

A: and press the <Enter> key.

e. Choose Intel(R)82801GR/GH SATA RAID Controller from the list indicated in the

XP/2000/2003 Setup Screen, and press the <Enter> key.

f. Press the <Enter> key to continue the installation process. (If you need to specify

any additional devices to be installed, do it at this time.) Once all devices are speci-

ﬁ ed, press the <Enter> key to continue with the installation.

g. From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The

XP/2000/2003 Setup will automatically load all device ﬁ les and then continue the

Windows XP/2000/2003 installation.

h. After Windows XP/2000/2003 Installation is completed, the system will automati-

cally reboot.

i. Insert Super Micro CD that came with the package into the CD Drive during system

reboot, and the Super Micro Main Screen will appear.

Note: the current version of the ICH7R SATA RAID Utility can only support Windows

XP/2000/2003 Operating Systems.