User's Manual

7-4

UPERSERVER 5015M-UR/5015M-U/5015M-NTR/5015M-NT User's Manual

Serial ATA

This setting allows the user to enable or disable the function of Serial ATA. The

options are Disabled and Enabled.

Native Mode Operation

Select the native mode for ATA. The options are Serial ATA and Auto.

SATA Controller Mode

Select Compatible to allow the SATA and PATA drives to be automatically-

detected and be placed in the Legacy Mode by the BIOS. Select Enhanced

to allow the SATA and PATA drives to be to be automatically-detected and be

placed in the Native IDE Mode. Note: Enhanced mode is supported by Windows

2000 OS or later.

When the SATA Controller Mode is set to Enhanced, the following items will

display:

Serial ATA (SATA) RAID Enable

Select Enable to enable Serial ATA RAID Functions. (For a Windows OS

environment, use the RAID driver if this feature is set to Enabled. When this

item is set to Enabled, the item: "ICH RAID Code Base" will be available for

you to select either Intel or Adaptec Host RAID ﬁ rmware. If this item is set to

Disabled, the item-SATA AHCI Enable will be available.) The options are

Enabled and Disabled.

ICH RAID Code Base (Available when SATA RAID is Enabled.)

Select Intel to enable Intel's SATA RAID ﬁ rmware. Select Adaptec to use Adaptec's

HostRAID ﬁ rmware. The options are Intel and Adaptec.

SATA AHCI (Available when SATA RAID is Disabled.)

Select Enable to enable the function of Serial ATA Advanced Host Interface. (Use

caution when using this function. This feature is for advanced programmers

only. The options are Enabled and Disabled.)

IDE Primary Master/Slave, SATA Port 1, SATA Port 2, SATA Port 3

and SATA Port 4

These settings allow the user to set the parameters for the IDE Primary Master/

Slave SATA Port 1, SATA Port 2, SATA Port 3 and SATA Port 4 slots. Hit <Enter>

to activate the following sub-menu screen for detailed options of these items. Set

the correct conﬁ gurations accordingly. The items included in the sub-menu are: