User Guide

2-4
X7DVL-3/X7DVL-i User's Manual
Installation of the Heatsink
CEK Passive Heatsink
Screw#1 Screw#2
Screw#1
1. Do not apply any thermal grease to
the heatsink or the CPU die; the required
amount has already been applied.
2. Place the heatsink on top of the CPU so
that the four mounting holes are aligned with
those on the retention mechanism.
3. Screw in two diagonal screws (ie the #1
and the #2 screws) until just snug (-do not
fully tighten the screws to avoid possible
damage to the CPU.)
4. Finish the installation by fully tightening
all four screws.
CEK Heatsink Installation
Screw#2
Warning: We do not recommend that
the CPU or the heatsink be removed.
However, if you do need to uninstall
the heatsink, please follow the instruc-
tions on the next page to uninstall the
heatsink to prevent damage done to
the CPU or the CPU socket.
To Un-install the Heatsink
!