Datasheet
5 6
6. (Oponal) Bitlocker password configuraon pops up. By using
Bitlocker, the USB drive will be encrypted. You will need to enter
the password each me to access the drive. If you choose not to
use Bitlocker, click Skip.
9. Select Shut Down to turn off the PC.
8. Once the drive is prepared, a new window asking you to choose a
boot opon will pop up
7. Click Create to begin provisioning Windows To Go on the USB drive.
a. This creaon me can vary depending on the hardware from which
you are running this.
**If the USB drive is removed from the PC while working in Windows To Go,
your session will freeze. If the USB is not reconnected within
60 seconds, the session will crash with a blue screen dump.**
How to Create Windows To Go Image on a USB Drive: How to Create Windows To Go Image on a USB Drive:
Prevenng a Frozen/Dead Drive:
Seng Up BIOS:
1. Turn on PC, or restart if it is already on.
2. As your computer is boong up, watch for a message which tells you how to enter BIOS.
a. Common BIOS messages:
• Press [key] to enter setup
• Setup: [key]
• Enter BIOS by pressing [key]
• Press [key] to enter BIOS setup
• Press [key] to access BIOS
• Press [key] to access system configuraon
3. Press the key or keys to get into BIOS.
4. In BIOS, navigate your way to boot order which can be under “ Boot” or “System Configuraon” or “Storage”.
5. Look for Boot Priority.
6. Select USB as the item to boot from first.
7. Save and Restart.
8. You should now boot into WTG off the USB drive.
*If you have configured a dual boot computer with a Windows operang system and another operang system, it might
work occasionally and fail occasionally. Using this configuraon is unsupported and not recommended.
Always shut down Windows and wait for shutdown to complete before removing the Windows To Go drive.
Do not insert the Windows To Go drive into a running computer.
Do not boot the Windows To Go drive from a USB hub. Always insert the Windows To Go drive directly into a port on the computer.
If available, use a USB 3.0 port with Windows To Go.
Do not install non-Microso core USB drivers on Windows To Go.
Suspend BitLocker on Windows 7 host computers before changing the BIOS sengs to boot from USB and then resume
BitLocker protecon.