USA Filtra+on Drinking Water System Installa+on Instruc+ons
1) Open Box 2) Package Components should include: 1-‐Filter Cartridge 1-‐Filter Housing 1-‐3/8 x 3/8 Hose 1-‐Metal Wrench 1-‐Moun+ng Bracket 2-‐3/8mpt x 3/8 compression fiHngs 8-‐Screws 3) Remove filter from housing and remove plasAc cover.
5) Next install both 3/8mpt x 3/8 compression fiJngs into filter housing. To do this, first wrap Teflon tape around fiHngs 5 to 6 +mes. Try to leave the front of the threads open for easier installa+on. DO NOT over Aghten; you’re puHng brass into pvc pipe, if it does not go in easy you may have cross threaded it.
6) AFach filter housing to the wall as close to plumbing as possible. You can do this with the Filter housing aXached or detached from the head. 7) Screw in filter housing with filter (if you took it off before installing to the wall). 8)Turn off water at the valve and relieve pressure at the faucet.
9) All sinks have a 3/8” compression nut and hose going to the faucet. You can simply remove the compression nut and aFach to the outlet of the water filter system. Make sure you use wrenches on both fiHngs to insure you don’t over +ghten the unit.
10) AFach enclosed tubing to the inlet of the housing, using wrenches on both fiJngs. Now aFach to the cold water inlet. 11) Make sure the housing bowl is hand Aghtened. The wrench is to remove the house, not Aghten it.
12) Turn on the water and check for leaks. 13) Flush out the filter for about 3 minutes.
