User Manual

2
2.Import Methods
Need to be sure to change one of import method .
3.Phonebook
You my save the information of contacts including
names and telephone numbers in the phonebook. The
storable entries of SIM card depend on the type of the
card.
4.Message
 SMS
The cell phone supports sending of and receiving of
SMS. You may check the quantities of sent and received
messages from the menu of SMS counter.
Write a message: You may select to send the finished
message from SIM card 1 or SIM card 2. You may select
multiple receivers to send the message to more than 1
person.
SMS setting: You may select to edit the SMS setting
either of SIM card 1 or 2, where, you can edit the
number of the service center (which is obtained from the
service provider).
 MMS
You may insert words, pictures, videos, sounds or
appendix in MMS, and may send the MMS to any Email
address or any cell phone number. If the MMS size is
oversized, the cell phone may fail to send or receive it.
Note: Consult with the local service provider for details
about MMS sending and receiving restrictions.
5.Settings
 General
Security setting
You may set functions in relations to cell phone
security.[phone lock：1234]
Restore the factory settings
7
Don't put the battery under high temperature or in fire;
otherwise, it may explode;
Don't attempt to take apart the battery;
Stop usage in case of damage or obvious aging of the
battery and charger;
Return waste and used batteries to the supplier or
specified recovery site. Don't throw it away in domestic
garbage.
23．Maintenance and service
Your equipment is a product with exquisite design and
process. Please use carefully. Following are some
suggestions for you to effectively use the maintenance
service.
1. Keep the equipment dry. Rainwater, moisture, other
liquids or moisture contents may contain mineral
matters, which may erode the electronic wires. If the
equipment is wetted, please take out the battery till the
equipment is totally dried and then put in the battery.
2. Don't use or store the equipment in dusty or filthy
places; otherwise, the detachable parts and electronic
elements may be damaged.
3. Don’t put the equipment in overheated places.
4. Don't keep the equipment in under cooled places;
otherwise, when the temperature rises to normal,
moisture may be generated within the equipment,
resulting in damage of the circuit board.
5. Please open the equipment as per the descriptions
in the manual. Don't try any other means.
6. Don’t throw, knock or shake the equipment. Any
rough treatment of the equipment may result in damage
of the inner circuit board and its exquisite structure.
7. Don't clean the equipment with ardent chemical,
detergent or strong wash.