User's Manual

26
 Change password: You can change the default password (1234) to your private password in 4-8 digits. If the phone lock
is enabled, the phone will prompt that “Phone locked” when you turn on the mobile phone. To unlock, please follow the
prompt to enter the password and click OK to confirm.

Change SIM2 PIN: You can change the SIM2 PIN (1234) to your private password in 4-8 digits. (SIM2 PIN2 is same)

Phone lock: You can activate or deactivate phone lock. The phone lock is a 4-8 digit password (default: 1234), which
you can change.

Keypad lock: You can activate or deactivate keypad lock. The mobile phone integrates keypad lock function. The
keypad locks in certain time automatically (5sec, 30sec, 60 sec and 5min).
Change password: Change the phone lock password
Connectivity
 Bluetooth.
In the Bluetooth interface, you can perform the following operations:
1. Activate Bluetooth: Activate/deactivate the Bluetooth.
2. Scan handsfree device: Scan handsfree device.
3. Match device: Scan new device or display the list of matched device; perform operations according to the options.
4. Online device: Display the connected devices.
5. Setting: Set the Bluetooth options. For example, change device name, set share directory and priority, receiving directory,
etc. The default share directory is the Received folder.
6. My Bluetooth: Display device name, Bluetooth address and supported protocols.
Reset
 Access the setting, select Reset, enter the password, and follow the prompt to reset and restart the mobile phone. This
operation will restore all default settings.
 Note: The default password is 1122.
Note: The menu is valid only when you set the shortcut function in Settings /Dedicated keys.
7. Appendix
Appendix A: Please take care of your mobile phone
Maintenance
The mobile phone is made in exquisite process. Please be careful while using. The suggestions below will help to extend the
service life of the mobile phone.
1> Keep the mobile phone and all its parts and accessories away from children.
2> Keep the mobile phone dry. Keep it away from the substances such as rain, moisture and liquids that may erode the circuits.
Do not use the mobile phone at places with too much dirt or put it at these places to avoid damaging the activate parts.
3> Do not put the mobile phone at the place with high temperature; otherwise, it will shorten the life of the circuit, and damage
the battery and plastic parts.
4> Do not put the mobile phone at cold place. When it becomes warm (normal temperature), moisture will generate in the mobile
phone and damage the circuit board.
5> Do not wash the mobile phone with corrosive chemical agent, cleaner or strong detergent. Dip soap water with soft cloth to
wipe the mobile phone.
6> If the mobile phone or any accessory can’t work normally, please send it to qualified service center.
Please dispose the used products according to local regulations.