User's Manual

9
Precautions of using battery
1> Switch off the phone before removing the battery.
2> Use the battery carefully. It will cause short circuit to connect the anode (+) and cathode (-) of the battery with metal
objects (coin, clip, etc.), and damage the battery and metal objects. When the battery is removed and put in the bag, do not
contact the anode and cathode of the battery with metal objects (e.g. keys).
3> Do not put the battery in fire, or use in any place with high temperature.
4> Do not disassemble or refit the battery.
5> Do not put the battery in the place with strong mechanical impact or break through with hard object.
6> Store the battery in cool and dry place, and avoid high temperature (> 60°C) and direct sunlight.
7> Stop using if there is any particular smell or overheating.
8> Stop using the battery if there is any crack, distortion or electrolyte leakage.
9> If the electrolyte stains the skin or clothes, please wash with soap and clean water immediately; the electrolyte enters the
eyes, wash with clean water immediately and go to see the doctor.
10> Do not use the lithium battery in low temperature, in which the battery can’t get the maximum standby/call time.
11> Do not wash the battery with water or organic solvent, or put it in water.
12> Fully charge the battery if it won't be used for a long time.
13> You are recommended to return wasted batteries to the manufacturer of mobile phone or put them in the specified public
recovery area of wasted batteries. Do not put them together with other garbage or dispose casually.
Using 2-in-1 charger (charger + data cable)
The 2-in-1 charger may charge the battery through the mobile phone.
1> Connect the data cable and charger
2> Connect the data cable of the 2-in-1 charger to the I/O slot of the mobile phone.
3> Connect the charger plug of the 2-in-1 charger to the appropriate power outlet.
4> During charging, the icon of battery status blinks until the charging completes.
5> After charging, the battery icon stops flashing, and you can pull out the 2-in-1 charger.
Note:
If the battery voltage is too low and can’t turn on the mobile phone, the charging icon may appear on the screen after several
minutes.
The mobile phone may be turned on or off during charging.
Warning: Make sure that the local voltage and power match the rated voltage and power of the 2-in-1 charger.
4.5 Switching on/off
1> Press and hold the End key to switch on the mobile phone. The screen shows the power on video.
2>
If the phone lock is activated, please input the password and press “OK”. The default password is 1122.
3>
If the PIN code is activated, please input the code and press “OK”. The PIN code is provided by the network operator.
4> Access standby interface.
5> Press and hold the End key to switch off the mobile phone.
4.6 Password
The mobile phone and SIM card have several passwords, which will prevent your mobile phone and SIM card from illegal
operation. Press “OK” after inputting the valid password (expressed in *). If there is misinput, please press the “Clear” key to