Manualshelf

Assembly Instructions

ManualsBrandsSuperDroid Robots ManualsCamera Pan and TiltsCamera Pan and Tilt System - Compact
1234
Page 3 of 4 Revision Date: November 17, 2003
SuperDroid Robots, a Division of Team Half-Life Inc.
Copyright 2003
position the arm where you want it. The servo arm should have about 180
degrees of movement. Fasten the servo arm with the small screw supplied with
the servo.
Figure 5
6. Mount the scanner to the large servo and adjust placement so desired travel is
achieved. 180 degrees of movement is achievable with servo. Fasten the
scanner with the screw supplied with the servo.