Manual

4WD & 6WD Wheelchair ATR
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: February 8, 2019 Page 7 of 11
Chain Guard
5. Slide the #40 10 tooth sprockets on the motor shafts, line them up with the slots in the chassis, and tighten
the set screws. Measure and cut the #40 chain to fit around the motor and drive wheel sprockets, making
sure the sprockets are aligned and the chain is clear of the sides of the slots.