Specification

Superior Building Supplies
1312 W McNab Rd
Fort Lauderdale, FL. 33067
Office: 888-328-9232 ● Office: 954-972-9504 ● Fax: 954-972-9521
cs@superiorbuildingsupplies.com
http://www.superiorbuildingsupplies.com
Suitable Substrates:
Substrates must be free of dirt, dust and other
contaminants (see adhesive manufacturer’s
technical information for details).
Dry, completely cured concrete
Concrete, masonry blocks or brick
facades
Cement backer units (CBU)
Well-fastened gypsum board or drywall
Exterior-grade plywood or well-fastened
wood plank
Well-fastened OSB (Oriented Strand
Board)
Product Specifications:
Products:
2l x 4l (0.61 x 1.22 m) / 8 sq. ft. (0.74
m2) decorative stone panels
(designed to interlock)
Inside and outside corner pieces
(designed to match the panels and
continue the stone look into and
around corners)
Ledge pieces (placed on top of a
panel to finish the look, if desired)
Limitations:
Do not install Superior Panels over
particle board, cork or other
dimensionally unstable substrates.
Do not install Superior Panels directly
over aluminum, vinyl or other exterior
siding. Remove siding in desired area and
affix to an approved substrate (see
Suitable Substrates).
Not for use as a flooring or other surface
subject to a traffic load.
Technical Information:
Density = 16 pounds per cubic foot
Compression Strength (lb/sq. in.) =
618 PSI
Tensile Strength = 480 PSI
Elastic Modulus = 13,300 PSI
Shear Strength = 245 PSI
Shear Modulus = 3,200 PSI
Flexural Strength = 800 PSI
Flexural Modulus = 21,330 PSI
K Factor ( BTU In/hr. sq ft. Farn.) =
.23

Summary of content (1 pages)