User Manual

ENFORCER Access Control Keypad with Proximity Card Reader

SECO-LARM U.S.A., Inc.

Programming the Super User Code:

The super user code has two functions:

• Unlike user codes, the super user code can operate output #1, output #2, and output #3.

• The super user code can also enable or disable output #1. An administrator may want to disable

output #1 in the evening or on the weekend to prevent other users from entering a protected

premises.

• The super user code is exempt from any system inhibition or lockup functions. It is valid at any

time.

Programming the Super User Code:

1. Make sure the keypad is in programming mode (see “Enter and Exit Programming Mode” on

page 11).

2. Enter the new super user code:

02 xxxx #

NOTE:

•

XXXX

represents the new super user code, which can be 4 to 8 digits long.

• There can be only one super user code for the keypad.

• Programming a new super user code will overwrite the previous super user code.

• The master code, super user code, common user codes, and user codes cannot

be the same.

Deleting the Super User Code:

This function is useful for protecting the premises in case the super user code is forgotten.

To delete a super user code:

1. Make sure the keypad is in programming mode (see page 11).

2. Enter:

02 #

Using the Super User Code:

In these examples, assume the super user code is

2580

1. Activate or deactivate output #1 (timed or toggle, depending on programming):

2580 # 1

2. Activate or deactivate output #2 (timed or toggle, depending on programming):

2580 # 2

3. Activate or deactivate output #3 (timed or toggle, depending on programming):

2580 # 3