User Manual

ENFORCER Access Control Keypad with Proximity Card Reader

SECO-LARM U.S.A., Inc.

Programming Duress Codes (cont.):

Examples:

1. Set the duress ID #1 code for output #1 to 1360:

41 01 1360 #

2. Set the duress ID #1 code for output #2 to 23980:

42 01 23980 #

3. Delete the duress ID #1 code for output #1 from memory:

41 01 #

4. Delete all duress codes for output #1 from memory:

41 0999 #

Operating Duress Codes:

If a duress code is used in place of a normal user code, both the appropriate outputs #1, #2, or

#3 and the duress output will be activated. However, a duress code cannot deactivate the duress

output. Only a normal user code/card, super user code, or a master code can deactivate the

duress output.

NOTE: A duress code can also be used in conjunction with a user card to activate the duress

output. However, a user card alone cannot activate the duress output.

Examples:

In these examples, assume that

1360

is an output #1 duress code and that

1369

is a user code.

1. Activate the duress output and output #1 using the duress code:

1360 #

NOTE: Subsequently entering the duress code will activate output #1 again, but will not

deactivate the duress output.

2. Deactivate the duress output using the user code:

1369 #

3. Activate the duress output and activate output #1 using the duress code and a user card:

READ CARD

1360 #