User Manual

ENFORCER 100LB/100CB Owner's Manual ENFORCER 100LB/100CB Owner's Manual
SECO-LARM U.S.A., Inc.
Page 3
TABLE OF CONTENTS
Transmitter Functions................................... 3
ENFORCER 100LB or ENFORCER 100CB? .... 3
Arming ......................................................... 4
Armed .......................................................... 4
Sensor Bypass .............................................. 5
Zone Bypass ................................................. 5
2nd Channel Output..................................... 5
Total Protection ............................................ 6
Disarming .................................................... 6
Emergency Disarm ....................................... 6
Valet ............................................................. 7
Patented Stay-safe Disarm .......................... 7
Dual-stage Shock Sensor ............................. 7
Chirp Delete (Silent arm/disarm) ................ 8
Emergency Call for Help (Panic) .................. 8
Power Door Locks ........................................ 8
Anti-Carjack Protection (optional)............... 9
Tamper Indicator & Trigger Zone ID ............11
Ignition-Controlled Power Door Lock ..........10
Other Features .............................................10
Appendix 1 — Understanding the Siren Chirps
& Light Flashes .......................................11
Appendix 2 — Understanding the LED
flashes .................................................... 12
Appendix 3 — Programmable Features .... 12
Lock
Unlock
Auxiliary
Panic
1. Press the I button to:
 Arm the alarm.
 Lock power door locks.
 Reset the alarm.
 Bypass an open zone.
2. Press the
II button to:
 Disarm the alarm.
 Unlock power door locks.
3. Press the III button to:
 Operate channel 2 (such as popping the
trunk or rolling up the windows).
 Silently arm or disarm the alarm.
 Bypass the alarm’s sensors.
4. Press the
IV button to:
 Turn the siren ON in an emergency.
Page 10
IGNITION-CONTROLLED POWER DOOR LOCKS
Your alarm can be programmed for ignition-controlled operation (doors lock when you turn the
ignition ON, and/or unlock when the ignition is turned OFF). Consult your dealer.
TAMPER INDICATORS & TRIGGER ZONE ID
If your alarm was triggered when you were
away, the siren will chirp two times and the
parking lights flash seven times when you
disarm your alarm. The LED flashes in quick
cycles to show where the car was violated as
follows:
 1 flash — The ignition was turned on.
 2 flashes — The alarm was triggered via
panic.
 3 flashes — The shock sensor or other
add-on sensor was triggered.
 4 flashes — A door was
opened.
 5 flashes — The hood
or trunk was opened.
 6 flashes — Current sensing was
triggered.
These “memory” flashes automatically reset
when the ignition is turned ON.
OTHER FEATURES
• Starter disable — With this optional feature,
while your alarm is armed, your car will not
start, even if a thief has your keys.
• Dual-power protection (DPP™) — Helps
keep your alarm powered even if a thief cuts
the alarm’s main power line. (Optional —
ask your dealer.)
• Double Pulse Lock/Unlock — For vehicles
that requires two pulse signals to arm/lock &
disarm/unlock.
TRANSMITTER FUNCTIONS
ENFORCER 100LB OR ENFORCER 100CB?
These two models offer the same convenience and protection features and have the same
operation. The only difference is that the ENFORCER 100CB features CODEBUMP

anti-codehopping technology. This means that the transmitter's code changes each time you
press one of its buttons to prevent thieves from using a code-grabbing device to copy the code.