Installation Guide

Page 17 of 41
TECHNICAL GUIDELINE
August 13, 2018
TG02 Rev.13
Communications 800.551.8948 | Fax [phone] | SuperiorEssex.com
Chapter 6 - Cable Installation
Preparing for Installation
Communications cables are designed with installation in mind. That being said, there are certain limitations
to cable performance that must be respected during installation. In general, the four most critical
characteristics to remain mindful of are tensile strength, bend radius, crush resistance, and temperature
rating. These characteristics vary among cables types, sizes, and even manufacturers. It is critical for the
designer and installer to be familiar with these criteria before the installation process begins.
Pre-Installation Testing
Superior Essex communications cables are manufactured to high standards and tested rigorously
in order to relieve end users of the burden of pre-installation testing. In normal situations, such
testing is not necessary and the cable can be installed, as received, with confidence. However,
pre-installation testing should be conducted if the customer specification requires it or if there is
evidence of cable mishandling or damage.
If pre-installation testing is required, see "Chapter 8 - Testing" on page 35 for additional information.