Safety Guidelines Carefully read, understand and Hollow all safety instructions in this manual. This is the safety alert symbol. When you see this symbol, look for one of the following signal words, Indicates a hazardous situation which, if rot avoided, will result in L ] death or serous injury, Indicates a hazardous situation which, it not avoided, could result in A caution death or serous injury, Indicates a hazardous situation which, if not avoided, could result in dinar or moderate injury.
Safety Information {continued) This pump motor is equipped with an automatic resetting thermal protector and may restart unexpectedly, Do not use this pump for potables drinking water. Use only in applications for which the pump is designed for. This pump is not Intended to pump water softener discharge {brine} or condensate. Pumping these liquids could cause damage to the pump and will void the warranty. According to the state of California {Prop.
Installation 1. glace the pump on a solid, level surface in the water. If necessary, place bricks or patio blocks under the pump to raise it off the surface. Do not place the pump directly in mud, sand or silt or on rocky surfaces as these materials can clog or cause damage to the pump. 2. Connect a hose or pipe 10 the pump discharge, Use either the supplied garden hose adapter ar other hose/pipe fitting {sold separately). Choose the best size hose or pipe for your application.
Performances Height, pipe diameter restriction and hose length will reduce the pump output performance, it is recommended to use the same size or larger pipe / hose as the pump discharge for optimum performance, The performances sifted helot were abstained by using 17 pipe. The use of a garden hose will reduce the output depending on size and length of hose used. To keep friction as low as possible, hose must be 172" or larger. Use the shortest length of hose possible for your application.
Troubleshooting DANGER Risk of electric shock, Always disconnect the power supply before ez AR If the pump does not start OF POSSIBLE CAUSES Pump is not plugged in, switch or breaker is off attempting to install, service or perform maintenance on the pump. Plug pump in or turn on switch/ breaker Check for blown fuses or tripped circuit breakers or tripped GFC outlets Replace fuse, reset breaker, reset Outlet Motor thermal protector tripped Allow pump to cool.
Replacement Parts 91016 & 91014 1 GHT Adapter 99003 99003 2 Motor* nla® far 3 Shaft Seal 99058 99058 4 impeller 99679 99080 5 Base 29142 99143 i motor fails, replace entire puny For Parts or Assistance, please call 1-800-495-9278 7
LIMITED WARRANTY UTILITY PUMPS: Superior Pump warrants the products specified in this warranty 1o be free farm defers In material ar workmanship for one (3} year from date of purchase, During the time period and subject to the terms and conditions, Superior Pump wil rapacity of replace t0 the origin user br consumer any portion f this product which proves to be defective due to materials or workmanship, At il times Superior Pu ta shall have and possess the sole right and option 1o determine whether to repai