Product Manual

ManualsBrandsSuperior Pump ManualsPlumbing Product1/5 HP Submersible Thermoplastic Utility Pump

2805 North Fairview Ave.

Roseville, MN 55113

1-800-495-9278

www.decko-usa.com

OWNER’S MANUAL

INSTALLATION AND OPERATION

INSTRUCTIONS FOR:

SUBMERSIBLE UTILITY PUMPS

Models:

91025, 91026, 91250, 91255

91251, 91257, 91330, 91335

91331, 91337, 91501, 91505

Superior Utility Manual Revised 12-05

Summary of content (4 pages)

PAGE 1
OWNER’S MANUAL INSTALLATION AND OPERATION INSTRUCTIONS FOR: SUBMERSIBLE UTILITY PUMPS Models: 91025, 91026, 91250, 91255 91251, 91257, 91330, 91335 91331, 91337, 91501, 91505 2805 North Fairview Ave. Roseville, MN 55113 1-800-495-9278 www.decko-usa.
PAGE 2
If for any reason you have questions concerning your new Superior Pump, call us toll free at 1-800-495-9278, or contact us on the web at www.decko-usa.com Carefully read and understand all of the Warnings and installation instructions in this manual. Failure to follow these instructions could lead to serious bodily injury and/or property damage. Retain these instructions for future reference. This pump has been manufactured with your needs in mind.
PAGE 3
REPLACEMENT PARTS DANGER To order replacement parts, Call 1-800-495-9278 1 Do not use this unit to pump chemicals, flammable liquids, sewage or corrosive liquids. You could injure yourself and the pump will fail. Pumping these types of liquids voids the warranty. Superior Pump and other pump companies manufacture pumps for these types of liquids. Make sure you purchase a pump designed for your specific needs. This pump will handle fluids with the same characteristics as water.
PAGE 4
WARNING ALWAYS DISCONNECT THE POWER SOURCE BEFORE ATTEMPTING TO INSTALL, SERVICE OR PERFORM MAINTENANCE ON THE PUMP. FAILURE TO DO SO MAY RESULT IN FATAL ELECTRICAL SHOCK. INSTALLATION/OPERATION 1. Place the pump on a hard surface in the water. Do not set the pump directly in mud or sand. This may cause the intake screen to clog or damage to your pump. 2. The water level must be at least 1” deep for the pump to operate. 3. Plug the power cord into a grounded 120-volt AC outlet.