Warranty Guide

ManualsBrandsSuperior Pump ManualsPlumbing Product1/3 HP Submersible Cast Iron Sump Pump

OWNER’S MANUAL

INSTALLATION AND OPERATION

INSTRUCTIONS FOR

SUBMERSIBLE SUMP PUMPS

Models:

92250, 92260, 92251, 92255

92257, 92330, 92331, 92335

92337, 92341, 92342, 92351

92352, 92501, 92511, 92507

Superior Sump Manual Revised 10/08

Summary of content (4 pages)

PAGE 1
OWNER’S MANUAL INSTALLATION AND OPERATION INSTRUCTIONS FOR SUBMERSIBLE SUMP PUMPS Models: 92250, 92260, 92251, 92255 92257, 92330, 92331, 92335 92337, 92341, 92342, 92351 92352, 92501, 92511, 92507 Superior Sump Manual Revised 10/08
PAGE 2
If for any reason you have questions concerning your new Superior Pump, call us toll free at 1-800-495-9278, or contact us on the web at www.superiorpumpco.com Carefully read and understand all of the Warnings and installation instructions in this manual. Failure to follow these instructions could lead to serious bodily injury and/or property damage. Retain these instructions for future reference. This pump has been manufactured with your needs in mind.
PAGE 3
NOTICE Height and/or piping restriction will reduce the pump output performance. See the performance chart below to insure you have the proper pump for your application. Whenever possible use the same size or larger pipe as the pump discharge for optimum performance. Reducing the pipe size will not harm your pump; it will just reduce the output.
PAGE 4
1. 2. INSTALLATION (New Pump) Set your new pump in the bottom of the sump basin off to one side. The pump should be placed on a solid foundation. Do not place the pump directly on the ground or sandy or rocky surfaces. Sand and small stones may clog or cause damage to your pump. Make sure the float switch will swing freely from the bottom to top without coming in contact with the side of the sump basin. Contact with the side of the sump basin may cause the switch to malfunction. See figure below.