Owner's Manual
|
29
Anti-tip Device Installation
WARNING
TIPPING HAZARD:
To reduce the risk of property damage or personal injury; install anti-tipping device
provided in accordance with the installation instructions in this document.
Device must be engaged properly to prevent product from tipping over.
TIPPING
Kit enclosed with the range. Mark and drill holes
where the bracket will be located.
GROUND FIXING BRACKETS
Adjust the range height by regulating the feet , until you reach the desired cooktop height.
Fix the components B to the ground , according to width Y (see below chart).
30” 36”
Y 28”
35/64
34”
17/32
Insert the component A in the hole in
the back of the cooker and measure the
distance X (from the upper edge of the
hole to the ground).
Fix A to B with the screws , keeping the
distance X.
Repeat the same sequence on the other
side of the product.
Slide the range towards the wall until the
brackets A are well into the holes in the
back of the product.
Measure from oor to the anti-tip bar located in a
slit on the back of the range.
A
X
B
Y
=
=
X