Owner Manual

28
|
Leg Installation/Adjustments/Alignment
Superiore ranges must be used only with the legs
properly installed.
Four height adjustable staineless steel legs,
assembled under the bottom of the range
Four height adjustable staineless steel legs are
delivered with the range in the polysterene
container situated over the appliance.
Before installing the legs, position the appliance
near its nal location as the legs are not suitable
for moving the appliance over long distances.
After unpacking the range, raise it enough to
insert the legs in the appropriate receptacles
situated on the lower part of the appliance.
Lower the range gently to keep any undue strain
from legs and mounting hardware. If possible use
a pallet or lift jack instead of tilting the unit.
NOTE: please install the front legs rst, and
then the back legs, to avoid any damage to
the unit.
Adjust leg height to the desired level by twisting
the inside portion of the leg assembly until the
proper height is reached. Check with a level that
the worktop allignement is perfectly level.
Insert the legs in the appropriate
receptacles
Remember that is indicated to set the high
corner of range so that the top of side trim is
3/8” (0.95 cm) above countertop. (see paragraph
“Dimension”)