Owner's manual

6
Maintainence
Condenser microphone shall be kept in low humidity environment for best sound performance. Store
the condenser microphones in airconditioned room or dehumidifier to keep away form moisture.
Clean air is another important factor. Keep away from smoking environment to avoid tar residuals.
PRO268B
PRA288A
! High sound pressure level, wide dynamic range, low distortion and
high gain before feedback.
! Extended low frequency response with elevation in the mid-high
section.
! Fit for the picking-up of instruments with mid-high frequency, such as
Hi-hat and cymbal, also suitable for recording in interview.
! Supplied with HM30S general clip and metal screw adaptor of 3/8"~
5/8".
! Supplied with S20 foam windshield.
! Tailored frequency response for snare drum.
! Mini shape, unnoticeable, easy to instal.
! Fit for the miking of snare drum.
! Supplied with HM10S general clip and metal
screw adaptor of 3/8"~ 5/8".
Drum clip ------------------------------------------------ HM12A
Elastic shock mount -------------------------------------- HM32
Table stand ----------------------------------------------- HM6
Supplied accessories
Optional accessories
Note
This user guide is also applicable to other microphone sets for
drum suite in DRKB series. DRKB consists of:
DRKB5C2MKIIDRKB4C2
DRKB3C2
DRKB4
DRKB3
PRO218A
1 Pc1 Pc1 Pc1 Pc
1 Pc
PRO228A
3 csP3 Pcs2 csP3 csP2 Pcs
PRO268B
2 csP2 csP2 csP
PRA288A
1 Pc
Complete set
Complete set
model
PRA-288A
miking snare drum
Mounting the microphone
Pressure gradient microphone is very sensitive to vibration. Suitable shock mount for high
performance microphone is necessary for extreme low noise recording. Sturdy stand can set the
microphone excatly at the sweet spot and keep it there. Choose heavy duty microphone stand for
studio condenser microphone which weights much more than handle microphone.
Superlux provides wide range of microphone stands for various demands. Big Foot Willie is specially
developed for large condenser microphones that able to support 2 large microphones with stereo
bracket for single point stereo recording.
Extension foot on all the 'E' versions serve to mount heavy studio microphone in limit space live
sound applications.
Directivity
Picks up most signal on axis. Rejects side and
picks up least to the back. Suitable for live
sound re-inforcement. Apparent proximity effect
and most singer likes to take this bass boost
advantages which is not good for speech.
Cardioid
Narrower than cardioid pattern. Suitable for
multiple microphone setup. Least sensitive
angle pointing toward side to rear where most
Super Cardioid
About Frequency Response
Suitable for working at controlled environment,
or for acoustic measurements. Although people
persuit flatness, but for none-professionals, it is
a challenge to makes it works as expectation.
Flat
Based on years of practical experience of pro
users. There are curves to be build for various
applications, so that it is very simple to use the
microp h one fo r the purp o se. Li miti ng
bandwidth, and emphasing are typical skill.
Popular curve response
Incorporating switchable filters to elliminates
interference, such as sub-sonic filter to cut air-
conditioner and floor vibrations. And allows full
flat when used in controlled environment.
Variable response
Extremely light weight diaphragm, very
sensitive to sound. Very small versions
available for hiding applications. High
performance condenser microphones are
regarded as standard equipment of recording
studios for extreme detail capturing. Operates
with power, such as phantom or battery.
Durable and simple structure, operates in all
kinds of environments. A good dynamic
microphone is capable to operate at very high
sound pressure level without distortion. Due to
structure limit, dynamics cannot be built as
small as condenser, but dynamics
doesn require power to operate.
Knowing your microphone
Superlux provides variety selection of microphones for professionals and amatures. To
know your microphone is the first step to successful result.
Type of transducer
Condenser
Dynamics
5
Features
Description
PRO218A
DRK B5C2MKII microphone set is an ideal candidate for stage
performance and professional recording studio. This microphone set
includes several mikes to match different instruments: namely, 1
PRO218A for bass instruments, 3 PRO228A for mid-low instruments, 2
PRO268B for mid-high instruments and 1 PRA288A for snare drum.
Among them, PRO228A features a swivel-integrated body, and other
microphones are supplied with clips.
These quality microphones are suitable for the picking-up of drum suite
and other instruments as well.
PRO228A
! Tailored low frequency response, tender and stout in bass.
! Hardly affected by the changes of load impedance, high gain before
feedback.
! Fit for the miking of bass instruments with wide dynamic range, such
as bass drum, kick drum etc.
! Supplied with HM27S anti-shock bushing and metal screw adaptor of
3/8"~ 5/8".
! Extended mid-low frequency features and wide frequency response.
! Durable to high sound pressure, wide dynamic range, low distortion.
! Fit for instruments with mid-low frequency, such as Tom-tom drum,
side drum, and guitar.
! Swivel-integrated body, metal screw adaptor of 3/8"~ 5/8".
4
HM10S
Mic clip
YA1
3/8"~5/8"
Screw
HM30S
Mic clip
S20
Pop screen
HM27S
Mic clip