User`s manual

Chapter 6: Advanced Chassis Setup

6-7

Warning: Except for short periods of time (such as for swapping hard

drives), do not operate the server with the hard drive carriers empty.

Figure 6-5. Removing a Hard Drive

DVD Drive Installation

The 1017C-TF server includes a pre-installed DVD-ROM.

Installing or Replacing a DVD-ROM Drive (Figure 6-6)

Power down the system and if necessary, remove the server from the rack.1.

Remove the chassis cover.2.

Unplug the drives power and data cables from the serverboard and/or back-3.

plane.