User`s manual

Chapter 5: Advanced Serverboard Setup
5-21
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the VGA
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on
the H8DGU-F serverboard (DP5001). The
amber LED on the right indicates activity,
while the green LED on the left indicates
the speed of the connection. See the table
at right for more information.
UID LED (LE1)
A rear UID LED Indicator, located at LE1,
works in conjunction with the rear UID switch
to provide easy identifi cation for a unit that
might be in need of service. Refer to Page
2-15 for further UID details.
Power LED
DP2 is an Onboard Power LED. When this
LED is lit, it means power is present on the
serverboard. Be sure to turn off the system
and unplug the power cord(s) before remov-
ing or installing components.
LAN LED
(Connection Speed Indica-
tor)
LED Color Defi nition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color Status Defi nition
Link
(Left)
Green:
Solid
100 Mb/s
Activity
(Right)
Amber:
Blinking
Active
Power LED (DP2)
State System Status
On Standby power present on
motherboard
Off No power connected