Datasheet

Chapter 5: Advanced Serverboard Setup
5-19
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each port, one LED indicates activity
while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
GLAN1/2 LED
(Connection Speed Indicator)
LED Color Defi nition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
Onboard Power LED (LE1)
An Onboard Power LED is located at
LE1. This LED Indicator is lit when
the system is on. Be sure to unplug
the power cable before removing or
adding any components. See the table
on the right for more details.
Onboard Power LED Indicator
(LE1)
LED Color Defi nition
Off System Off
Green System on
SMBus to PCI-X/PCI-E Slots
Jumper Settings (JI
2
C1/JI
2
C2)
Jumper Setting Defi nition
JI
2
C1: Closed JI
2
C2:Closed Enabled
JI
2
C1: Open JI
2
C2: Open Disabled
SMBus to PCI-X/PCI-Exp. Slots
Jumpers JI
2
C1 and JI
2
C2 allow you to
connect the System Management Bus
(I
2
C) to the PCI-X/PCI-E slots. The
default setting is Open (Disabled.) Both
jumpers must be set to the same setting
See the table on the right for jumper
settings.