Datasheet

7-8

UPERSERVER 5015B-MT User's Manual

ACPI Mode

Select Yes to use the ACPI (Advanced Conﬁ guration and Power Interface)

power management feature on your system. The options are Yes and No.

Power Button Behavior

If set to Instant-Off, the system will power on or power off immediately as

soon as the user hits the power button. The options are Instant-Off and 4-

Second Override.

Resume On Modem Ring

Select On to “wake your system up” when an incoming call is received by your

modem. The options are On and Off.

Resume On PME#

Select On to “wake your system up” from the PME# of PCI slots. The options

are On and Off.

PS2 Keyboard (KB)/Mouse Wake Up

Select Enable to “wake your system up” from the S1, S4 or S5 state. If this

feature is set to Enabled, you will also need to enable the JPWAKE jumper by

closing pins 1-2. (Please refer to Pg. 1-5 and Chapter 2 for more details). The

default setting is Disabled.

Power Loss Control

This setting allows you to choose how the system will react when power returns

after an unexpected loss of power. The options are Stay Off, Power On, and

Last State.

Watch Dog

If enabled, this option will automatically reset the system if the system is not

active for more than 5 minutes. The options are Enabled and Disabled.

Summary Screen

This setting allows you to Enable or Disable the summary screen which displays

the system conﬁ guration during bootup.

Advanced Processor Options

Access the submenu to make changes to the following settings.

CPU Speed

This is a display that indicates the speed of the installed processor.